Perspective development

Below are our developments that are at the stage of homologation to production and are still offered in the form of samples.

Experimental compositions of SINTEFLOW polycarboxylate ethers

SINTEFLOW MEGA 71 is a high range water reducer with an increased strength development at all days of hardening.	SINTEFLOW MEGA 71 is a high range water reducer with an increased strength development at all days of hardening. In terms of "Water reduction", this composition is similar to MEGA 50, however, by changing the modes of synthesis and using new components, it provides a strength increase of +10 - 15% from the first day of hardening.
SINTEFLOW MEGA 73 a water reducer with increased strength development.	SINTEFLOW MEGA 73 - a water reducer with increased strength development. The main purpose of the development of this synthesis is polycarboxylate ether, which provides low W / C ratio in concrete with a high content of dust-like particles: clay sands, cements on siliceous marl, microsilica, etc.
SINTEFLOW SENSITIVE 51 a new synthesis of the slump retarder.	SINTEFLOW SENSITIVE 51 - a new synthesis of the slump retarder. The main goal is the creation of polycarboxylate ether with the maximum slump retention time of the concrete.

A series of dehydrogenated polycarboxylate ethers

SINTEFLOW

DM Dry polycarboxylate ether

SINTEFLOW

DD Dry polycarboxylate ether

SINTEFLOW

DS Dry polycarboxylate ether

SINTEFLOW DM, SINTEFLOW DD and SINTEFLOW DS are products of low-temperature spray drying of SINTEFLOW polycarboxylate ethers with technological additives.

SINTEFLOW DM - dehydrated MEGA 50;
SINTEFLOW DD - dehydrated DUO 2605;
SINTEFLOW DS - dehydrated SENSITIVE 50;

All brands are distinguished by a high regeneration of properties with respect to the initial composition (loss of efficiency in water reduction is no more than 3%).
Dehydration is carried out without the use of inert bodies. Powders are 100% active ingredient.
Powder dispersion is high.
Intensively soluble in water.
Solubility in water is not limited.

To learn more about dry esters of polycarboxylate please visit our landing page

Auxiliary formulations

SINTEFLOW GL Concrete mix stabilizer	SINTEFLOW GL - concrete mix stabilizer based on ethoxylated fatty acids. The purpose of this composition is to regulate the viscosity of highly mobile concrete mixtures. The stabilizer can be perfectly mixed with polycarboxylate ethers in any ratios.
SINTEFLOW DG Concrete reinforcer	SINTEFLOW DG is a concrete reinforcer based on hydroxypropyllated ethanols. SINTEFLOW DG is added to the concrete mix together with polycarboxylate ethers or independently. Hydration of cement in the presence of SINTEFLOW DG is characterized by a more active formation of ettringite, which leads to an active strength development of the cement stone in all periods of hardening.
SINTEFLOW AD Concrete reinforcer	SINTEFLOW AD - concrete reinforcer polyalkylen ethers and methyl ethanol based. It is added to the concrete mix only with polycarboxylate ethers. SINTEFLOW AD significantly reduces the hydrophilic lipophilic balance of polycarboxylate ethers. As a result, the air entrainment in concrete mixtures, plasticized with polycarboxylate ethers is significantly reduced, which leads to an increase in the strength properties of concrete. A feature of SINTEFLOW AD is that its introduction does not affect the rheology of fluid and cast concrete mixes.

We need your help! By providing to our customers samples of new products, we look forward to receiving a feedback on the effectiveness of these products. Such interaction will allow us to optimize formulations and introduce products with optimal properties into production.

Oleg Kuharev

Director of
Sintez OKA – Construction chemistry LLC